BMW E60 M5 with M-Shift number plate

M-SHIFT PREMIUM / OUR BESTSELLER

Engine and gearbox.
Working together.

DME calibration and SMG III refinement for supported BMW E60 M5 and E63/E64 M6 configurations.

US$660 · Perpetual licence · One VIN

WHAT PREMIUM INCLUDES

Considered changes.
A more cohesive drive.

01 / SHIFT REFINEMENT

Feel the difference
between shifts.

BENIKI’s Shift Moderniser focuses on low- and mid-speed SMG behaviour: reducing lazy shifts, sharpening response and refining off-throttle downshifts.

02 / ENGINE CALIBRATION

Power, with
drivability in mind.

Choose Stage 1 or Stage 2 Power Enhancement for suitable vehicle configurations, alongside the included Basic DME options.

03 / SMG III TUNING

Make the gearbox
work your way.

Choose stock Euro or modernised SMG III calibration, with configurable automatic/manual start modes and memory options.

BENIKI’S SHIFT MODERNISER

Developed around
the shifts you feel.

Our flagship SMG enhancement is the result of 18 months of reverse engineering and on-car testing. During development, we benchmarked the Ferrari F430’s F1 transmission as a reference for single-clutch automated manual shift behaviour.

The DME plays a central role in how the SMG executes a shift. Premium focuses on the low- and mid-speed behaviour that matters in everyday driving: reducing lazy shifts, sharpening response and refining off-throttle downshifts. The goal is better shift quality where you feel it, rather than chasing peak shift-speed numbers.

SMG III, configured for you.

  • Stock Euro or modernised TCU calibration.
  • The modernised calibration starts in first gear in D1.
  • Improved low-speed downshift behaviour.
  • Selectable automatic and manual start modes, including memory modes.

BASIC TOOLS, INCLUDED

Your calibration.
Your configuration.

Read and retain the original DME file, choose supported changes, then prepare and flash through M-Shift Studio.

  • VMax delimiter and engine-speed limits
  • Engine start-up bark options
  • Oil-service interval adjustment
  • Stock, 599 or S65 injector calibration
  • M-Drive default configuration where supported
  • Read, save, prepare and flash workflow

BEFORE PURCHASE

Make sure your setup is ready.

Feature availability and compatibility are checked against the connected, licensed VIN. You need a supported vehicle and configuration, a high-quality K+DCAN interface with EdiabasLib firmware, stable vehicle power and a PC running 64-bit Windows 10 or 11.

Engine compatibility: Premium’s included engine tunes are for naturally aspirated engines with standard camshafts and standard displacement. Premium does not support Alpha-N configurations on native MSS65 firmware.

PLANNING A CSL-INSPIRED BUILD?

Meet Ultra.
The CSL tune.

For CSL Alpha-N and supported DCT integration on original MSS65 hardware, explore Ultra’s custom firmware package and its installation requirements.

BMW E60 M5 CSL prototype
BMW M5 CSL prototype · Photo: BMW M

A MATCHED APPROACH

DME and SMG: designed to work together.

The SMG tune is intended to be used with the M-Shift Premium DME tune. The two tunes work together. BENIKI’s Shift Moderniser adjusts the DME’s coordination of engine torque and shift timing. The SMG III calibration controls automatic-shift behaviour and the starting Drivelogic programme.

CONFIGURATION DETAILS

More control over your setup.

Premium lets you customise your tune in M-Shift Studio. Choose supported settings to suit your car, save your customised file and write it to the DME.

The DME screen presents BENIKI’s Shift Moderniser and power enhancement as separate controls. Power choices shown are Stock, Stage 1 and Stage 2 Catless. Select only settings appropriate for your hardware.

  • VMAX delimiter; cold-start, SAP, EVAP, post-cat O₂ and primary-cat delete options for the stated motorsport/off-road use.
  • Engine start-up bark settings at 1,500 or 1,900 rpm.
  • Stock, 599 or S65 injector calibration.
  • Engine-speed selections labelled Stock S85 (8,250 rpm), Stock S65 (8,400 rpm) and Raised (8,500 rpm). These are configuration choices, not approval for any engine to run at a selected limit.
  • M-Drive default configuration.
  • Oil-service interval adjustment for supported MSS65 160E binaries.

Available controls depend on the loaded binary, connected vehicle and licence. The presence of an option does not establish compatibility with every setup.

DME workflow and options →

FROM THE COMMUNITY

Read the discussion.
Make up your own mind.

Explore the M5Board thread about M-Shift’s integrated DME and TCU tuning app. Read the community’s experiences, questions and discussion in their original context.

Read the M5Board discussion ↗

Independent forum discussion · Opens M5Board in a new tab